High-performance fire hydrants are vital for combating fires as they provide a ready supply of water. Our dry type fire hydrants have been certified by LPCB.
Break away design to prevent accidents to the hydrants,where only the upper part of the flange would be broken upon impact, When broken, still able to maintain seal,does not leak.
Simple rugged construction and easy to maintain.
Automatic drain system drains the water in the upper part when the main valve is closed thus avoiding damage caused by freezing.
Externally sand blasted for smooth finish, painted red with electrostatic powder coating on the section above the ground and double coating of black bituminous paint on the section below ground, all paint thickness ≥300μm.
Hydrants for non potable water systems.
Flange according to customer requirements.
Stem,steel or stainless steel for extra corrosion resistance.
Model | FT-7S100 | FT-7T150 | |||
Standard | BS EN 14384 | ||||
Working Pressure | 16 BAR | ||||
Inlet | DN100 with Flange | DN150 with Flange | |||
Outlet | 2*2.5” BSP, 1*4” BSP, with Coupling or Landing Valves | ||||
Dimensions (mm) | A | 100 | |||
B | 70 | ||||
C | 413 | ||||
D | 563/716/943 | ||||
Shell Material | Ductile Iron | ||||
MOT | ≤125NM | ≤125NM | |||
MST | ≥250NM | ≥250NM | |||
Kv Value | 112.72 (2.5” Outlet), 223.47 (4” Outlet) | ||||
Closing Direction | Clockwise | ||||
Opening Turns | 11 | ||||
Time for Draining | ≤10MIN | ||||
Retained Water | ≤150ML | ||||
NO. | ITEM |
1 | Operating Handle |
2 | Operating Nut |
3 | Cover |
4 | Cover Bolt |
5 | Bushing |
6 | Connecting Stem |
7 | Upper Barrel |
8 | Upper Stem |
9 | Stem Coupling |
10 | Pedestal |
11 | Bolts |
12 | Lower Stem |
13 | Spring Seat |
14 | Spring |
15 | Lower Barrel |
16 | Bottom Bolt Gasket & Nut |
17 | Automatic Drain Assembly |
18 | Seal |
19 | Seal Seat |
20 | Band (90°or 180°Type) |
info@firetechsh.com
