High-performance fire hydrants are vital for combating fires as they provide a ready supply of water. Our dry type fire hydrants have been certified by LPCB.
Simple rugged construction and easy to maintain.
Automatic drain system drains the water in the upper part when the main valve is closed thus avoiding damage caused by freezing.
Externally sand blasted for smooth finish, painted red with electrostatic powder coating on the section above the ground and double coating of black bituminous paint on the section below ground,all paint thickness ≥300μm.
Optional: Barrel length extension kit in different lengths is available on request.
Hydrants for non potable water systems.
Flange according to customer requirements.
Stem,steel or stainless steel for extra corrosion resistance.
Model | FT-8S100 | FT-8S150 | |||||
Standard | BS EN 14384 | ||||||
Working Pressure | 16 BAR | ||||||
Inlet | DN100 with Flange | DN150 with Flange | |||||
Outlet | 2*2.5” BSP, 1*4” BSP, with Coupling or Landing Valves | ||||||
Dimensions (mm) | A | 207 | 195 | ||||
B | 395 | 455 | |||||
C | 800 | 1200 | 1450 | 800 | 1200 | 1450 | |
Shell Material | Ductile Iron | ||||||
MOT | ≤125NM | ≤125NM | |||||
MST | ≥250NM | ≥250NM | |||||
Kv Value | 104.87 (2.5” Outlet), 184.29 (4” Outlet) | ||||||
Closing Direction | Clockwise | ||||||
Opening Turns | 16 | 15 | |||||
Time for Draining | ≤10MIN | ||||||
Retained Water | ≤150ML | ≤200ML | |||||
NO. | ITEM |
1 | Operating Handle |
2 | Operating Nut |
3 | Cover |
4 | Cover Bolt |
5 | Upper Barrel |
6 | Upper Stem |
7 | Claw Bolts |
8 | O-Ring |
9 | Claw |
10 | Nut |
11 | Lower Stem Assembly |
12 | Lower Barrel |
13 | Bottom Bolts |
14 | Automatic Drain Assembly |
15 | 90°Bend |
16 | O-Ring |
17 | Cover Sheet |
18 | O-Ring |
19 | Stem Coupling |
20 | Stem Coupling Bolt |
21 | Stem Coupling Nut |
info@firetechsh.com
